Wallcovering Adhesive Flakes

Its appearance of white flaky powder made of modified potato starch
Environment-friendly with no formaldehyde and other harmful substances.
Easy to carry, good for DIY.

Send Inquiry

Description

Introduction:

The product is a type of white powder made of potato modified starch, supplemented by small amounts of cellulose.
It can be mixed with room temperature water to form the glue and paste a variety of wallpapers.

Characters:
1. Adapting natural potato starch, no abnormal and irrupting odour
2. Strong viscosity, stable performance, easy to use
3. Efficient water soluble and antibiosis, environment-protection
4. Wide application, can paste a variety of wallpapers

Usage:
Always follow wallpaper manufacturers instructions for hanging. The mixing ratio of powder to water depends on the type of wall covering to be hung. Usually no more than 5kg water to each box powder to avoid over-solution. Stir briskly until the solution starts to thicken. Leave to stand for 3 minutes then re-stir. After mixing, please keep the glue for 10-15 minutes, then you can start the wallpapering.

Test Report:

Test Items	Requirements
Appearance	White flaky powder, without caking
Odour	No abnomal and irrating odour
Viscosity（powder：water）=1：35）	≥8000mpa.s(25℃±1℃)
pH value	8-10
Dissolution case	No granule, completely gelatinized
Moisture Content	≤8.0
Free Formaldehyde (g/kg)	None
Total volatile organics (g/L)	None
Benzene (g/kg)	None
Methylbenzene+ Dimethylbenzene (g/kg)	None