Products Categories
Contact Us

ADDRESS:No.106 West Ring Road, Wutong Street, Economic Development Zone, Tongxiang City, Zhejiang Province, China

How To Mix Wallpaper Glue Powder
Dec 20, 2018

Wallpaper glue is also called wallpaper glue, the focus is on the glue, it is used to stick the wallpaper. It is a construction-specific viscose product made from natural plant potato starch and made of polymer extract. It is a basic function to ensure the adhesion and service life of the wallpaper. At the same time, Garefu  also requires products to be environmentally friendly. Can't pursue environmental protection, ignore adhesion, or pursue adhesion and neglect environmental protection.

Cellulose Paste Powder

The glue is generally made of a mixture of wallpaper rubber powder and white glue, and the viscosity is appropriate, and it is easy to brush. The viscosity is adjusted by the amount of water added. The wallpaper powder is natural starch, and the white glue is synthetic resin (vinyl acetate resin). In order to ensure good wallpaper paste effect, different amounts of white glue are often added according to different wallpapers. The cloth base surface cloth is thicker and thicker. The glue preparation is thicker than other wallpapers. It can be prepared with white glue and wall powder below 15 ounces. The special glue for wall cloth can be used for 15 ounces or more. The special glue can be used for 5 square meters per kilogram. Meter.

First of all, be sure to clean the tool before the wallpaper rubber powder is prepared. According to the actual needs of the construction, add 4-5 kg of water to the container, then slowly mix the rubber powder while stirring evenly. Stir it for 2-3 minutes while stirring. After being fully stirred and then placed for 10-15 minutes, the best results can be achieved in the process of using wallpaper rubber powder.

After the wallpaper is glued to the wall, it must be flattened to remove the bubbles. Generally, the rubber surface wallpaper is more resistant to water washing, so you can use the “plastic scraper” to gently scrape the surface and drive out the air bubbles. If a small amount of glue is driven out of the surface, it should be wiped clean with a wet sponge. The scraper should not be too hard, otherwise it will be easy to scrape. The surface of the wound causes defects such as fading, reflection, and seams. The surface of high-grade textile wall covering is susceptible to damage. As long as it is lightly brushed with a short brush, and the amount of glue is appropriate, the glue must not be driven out of the joint and contaminate the surface, otherwise it cannot be disposed of. Paper wallpapers are delicate and can only be used with short hair brush. Avoid contact with the glue. If you accidentally touch the surface, wipe it off immediately. Otherwise, the glue will not be removed after drying, and it will cause chromatic aberration. When any wallpaper is constructed, the glue should not touch the surface of the wallpaper, which is the perfect construction process.

The main component of wallpaper rubber powder is natural resin starch, supplemented with white tackifier composed of micro-tackifier and anti-mold agent. It has strong adhesion, stable performance, good water solubility, easy construction, environmental protection and no toxic side effects. Many advantages. In the process of wallpaper construction, the wallpaper can be effectively pasted on the wall.

There are three main types of wallpaper rubber powders on the market: glutinous rice glue, functional glue, and rubber powder glue sets. Glutinous rice gelatin is the mainstream product on the market. It is made of pure natural glutinous rice starch and has good environmental protection properties. It is suitable for all kinds of wallpapers. If you are importing products when purchasing wallpaper powder, you must pay attention to whether it has Chinese logo.

Related News