Can It Be Directly Installed On The Wall Without Coating The Base Film And Glutinous Rice Glue?

The glutinous rice glue cannot be directly applied to the wall without the base film. The reasons are as follows: 1. The base film needs to be brushed before the wallpaper is applied. Mildew and moisture-proof effect, prolong the service life of the wallpaper, avoid mold and warping; Second, brush the glutinous rice glue again, after the base layer is dry, when pasting the wallpaper, brush the glutinous rice glue on the back of the wallpaper or on the wall to bring better paste. Effect.

Without coating the base film, can the glutinous rice glue be directly applied to the wall?

1. Brush the base film first

Before sticking wallpaper, you must brush the base film first, and the construction manual, it will clearly show that it is necessary and important to brush the paint film when sticking the wallpaper. The role of base film brushing is mainly to strengthen the base layer and to form a protective layer on the wall to isolate water vapor and acid and alkaline substances, so as to achieve better anti-mildew and moisture-proof effects. Moreover, the wallpaper is not prone to mold and warping problems, which prolongs its service life of the wallpaper.

If the base film is not applied, it will directly lead to the inability to form a moisture-proof layer on the wall. Once the wall is damp, no matter how good the type of glue you choose in the future, it will also cause the stickiness of the wallpaper to lose its effect. At the same time, because it has not achieved the functions of waterproof, moisture-proof, and mildew-proof, the wallpaper is prone to mildew and discoloration.

2. Brush glutinous rice glue again

After the base film is applied to the wall, after drying, the glutinous rice glue is applied. You can directly add water to the glutinous rice glue, then adjust it into latex, and then brush it on the wall or the back of the wallpaper, which can bring a better bonding effect. If you have scraped the putty, you must use the base film and then use the glutinous rice glue, so the glutinous rice glue and the base film should be the perfect partner, and the two are indispensable.

What are the steps to putting wallpaper?

1. Do the basic treatment first

To paste the wallpaper on the wall, you need to clean the wall first. Before construction, make sure the wall is firm and dry. If it is found that the wall itself has the problem of mold, peeling and falling off, it is necessary to remove the falling off or hollowing problem with a shovel.

2. Scrape putty

It is also necessary to do a good job of leveling the wall, which needs to be leveled with putty powder and can ensure that the wall reaches a certain smoothness.

3. Brush base film

Next, you need to brush the base film and pretreat the wall. First, add the base film to the water and stir for 2 to 3 minutes. This base film can be permeable, and then when brushing, the first brushing is performed from bottom to top. After the 1st coat is dry, apply the 2nd coat.

4. Apply glutinous rice glue

Apply glutinous rice glue directly to the edge and back of the wallpaper to ensure uniformity. The edges can be painted a little more, and then the wallpaper is pasted. While pasting, use a scraper to squeeze out the excess glue.

5. Do a good job of splicing

If the wallpaper has a pattern, it is necessary to do a parquet process. You need to spread the second one, match the pattern of the first one, and cut out the same size. You need to measure the height and width of the wall in advance, and you can calculate how many rolls of wallpaper you need. After the wallpaper is spread out, the edges and corners are laid along the wall and must be brushed evenly.

6. Trimming and cleaning

Cut off the excess wallpaper at the upper and lower ends, and then use a sponge to soak it in water to completely wipe off the glue on the surface. Keep it closed for another day, do not open the window for 24 hours, and let the wallpaper dry slowly.