How To Install Wall Covering

Wallcovering is a new wall decoration product that has emerged in recent years. It is called the fashion on the wall. , sound-absorbing, antibacterial, waterproof, oil-proof, anti-fouling, dust-proof, anti-static, easy to care and other advantages, more and more recognized and liked by consumers, and the market share is getting higher and higher!

Now let's take a look at the construction steps of the wall covering.

▶Wall treatment

The walls should be flat, dry, firm, free of dirt, and have a moderate pH.

Be sure to apply the wall base film before gluing. The wall base film can deeply penetrate the interior of the wall, form a dense film layer, and improve the toughness, thereby strengthening the wall, sealing the wall, blocking the extravasation of water in the wall, and prolonging the service life of wall decorations such as wallpaper, to a large extent. It plays the role of remodeling the wall. Wall base films with different functions can be painted according to different wall problems. If the powder drop is slight, it is enough to apply the super-penetrating wall base film once; for the wall with a more serious powder drop, the wall base film needs to be painted twice. Repair and protect the wall in an all-around way; if the powder drop is very serious, you must re-apply putty; if it is a latex paint wall, choose super-strong gold; if the wall has a color difference, choose super-strong covering wall base film, etc.

Only such meticulous wall treatment can ensure the strong and lasting effect of the wall covering!

▶ Glue selection: special glue for wall covering

The wall covering is relatively thick, and it has higher requirements on the viscosity value and durability of the glue. Therefore, during the construction of the wall covering, attention should be paid to the selection of wall covering glue with a high viscosity value. Special glue for wall coverings with higher viscosity and easier construction.

Construction steps

1. When gluing the wall, be sure to apply the thick glue thinly and evenly;

2. Two people work together to hang the wall covering on the wall, one puts the wall covering, and the other sticks it. Xiaojia warmly reminds you to pay attention to starting or disconnecting from the hidden part of the room, and pay attention to construction in one direction;

3. Use the parquet locator for positioning, which can better ensure the accuracy and verticality of the starting position of the wall covering;

4. Cut out the positions of windows, doors, switches, and air conditioning ports. Before cutting, it must be thoughtful in advance, and the knife should not be blindly cut. The wallpaper knife is inconvenient to cut, and the edges and corners can be cut with scissors;

5. The handling of yin and yang angles must be beautiful. First, make the inner corner, use a large scraper with the left hand to hold the inner corner to position, and use the large scraper with the right hand to scrape down to the bottom edge; press the outer corner with a special iron to make the wall sharp and angular;

6. Scrape the plane evenly with a brush, and control the tightness of the cloth surface. This is related to whether the inner corner can be in place and whether it can be done beautifully;

7. After the construction is completed, check the wall surface comprehensively, wipe off the excess glue with a clean wet towel, and press it with iron if there is foaming or hollowing to ensure the construction quality.

The wall covering has a very decorative effect. If we can pay attention to careful maintenance in the later stage, the service life of the wall covering can reach 5--10 years, or even longer! For example, every 3-6 months, we can use a vacuum cleaner or a brush with an appropriate amount of water to scrub the wall cloth. Of course, we must pay attention to the amount of water not too much, so as not to seep into the wall cloth and cause mildew.