How To Choose And Use The Common Tools For Wallpaper Construction?

The choice of tools is very important for the wallpaper wall covering. The so-called workmanship must first sharpen his tools. If the tools are selected properly, it will help you get twice the result with half the effort and complete the construction of high-quality wallpaper wall covering better and faster.

Let's talk to you about the selection and use of common tools in the construction of wallpaper wall coverings. Let's take a look.

1. What is the difference between a soft brush and a scraper?

Scraper: Used for surface construction of wallpaper wall covering. The scraping sequence is from inside to side. After the wallpaper wall covering is pasted up and down, then press the mat to pave it and drive out the excess air bubbles. It is generally used for ordinary wallpaper construction.

Soft brush: It is mostly used for the construction of wallpaper wall coverings that require special protection, such as pure paper wallpaper, textile surface wallpaper, natural material wallpaper and various wall coverings.

The scraper is mainly used for the construction of some conventional wallpaper wall coverings, and the soft brush is used for the construction of natural material wallpaper wall coverings, gold foil paper, non-woven fabrics, sandstone wallpaper and some textile wall coverings.

The difference between the two lies in two aspects:

(1) The soft brush can protect the surface of the wallpaper from damage. For natural wallpaper wall coverings, gold foil paper, non-woven fabrics, sandstone wallpaper and some textile wallpaper wall coverings, if you simply use a scraper to construct, it is likely to damage the surface of the wallpaper wall covering and cause damage.

(2) The soft brush can guarantee the construction effect and improve the construction efficiency. Soft-bristles are divided into short-bristles, medium-bristles, and long-bristles according to the length of the hair. The longer the length, the softer the force on the surface of the wallpaper wall cloth during construction, and the more suitable it is for wallpaper walls with delicate and easily damaged surfaces. cloth.

2. What is the function of the pressure roller and how to use it?

The function of the pressing wheel is to flatten the wallpaper wall covering of certain specific parts on the wall. These specific parts include areas such as the internal corner, the external corner, and the edge seam of the wallpaper wall cloth. Therefore, the pressure rollers can be divided into internal pressure rollers, male corner pressure rollers, flat pressure rollers, etc., and according to the material can be divided into PM plastic pressure rollers, TM rubber pressure rollers, stainless steel pressure rollers and marble pressure rollers. In view of different wall, wallpaper and wall cloth conditions, different pressing wheels should be selected.

The flat pressing wheel is used for the treatment of the joints of the wallpaper wall cloth, and the air at the joints of the wallpaper wall cloth is discharged by rolling, so that the wallpaper wall cloth at the joints and the wall are more closely connected to prevent the wallpaper wall cloth from warping and slitting .

Pay attention to the degree of softness and hardness of various pressure rollers, choose suitable pressure rollers for construction according to different situations, and be careful not to damage the surface of the wallpaper wall cloth.

3. How to use the male and female rollers?

The external corner press roller is used for the construction of the wall covering at the external corner. After the wallpaper wall cloth is pasted, the external corners are easy to hollow. At this time, the external corner pressing wheel needs to be used to make the external corners more perfect. Make the notch of the male angle pressing wheel closely integrate with the outside angle of the wall. Pay attention to the wallpaper wall covering of some special materials on the pressing wheel, and beware of white edges.

The internal corner pressure roller is used for the treatment of the wall covering at the internal corner position, and the pressure roller is close to the internal corner position to ensure that the air in the internal corner position is discharged. The inner corners are easy to warp and slit, so it is necessary to compact the wallpaper wall cloth and discharge the air inside the wallpaper wall cloth to prevent the wallpaper wall cloth from warping.

4. What is the function of the wallpaper cutter and how to use it?

Wallpaper cutter is also called wallpaper cutting ruler. When cutting wallpaper wall covering, it is used to ensure that the cut wallpaper wall covering is straight. It is mostly used for cutting the top and skirting positions. It can also be used to treat small particles on the wall before the construction of the wallpaper.

When pressing the edge and cutting, the angle with the wall is controlled within 45°, so that it is convenient to ensure that the wallpaper wall cloth cutter is perpendicular to the wall.

5. What are the functions of the old wallpaper roll?

The old wallpaper roll is a professional tool for removing old wallpaper and wall covering. When using it, it is placed on the surface of the wall covering and pierced with small holes, and then sprayed or rolled to the surface of the wall covering, so that the water can penetrate into the wall covering. And fully soak the wallpaper wall covering, then the old wallpaper wall covering can be easily torn off.

At the same time, the old wallpaper roll also has the function of treating the latex paint wall surface. When the base film of the wall cannot penetrate into the latex paint layer, the old wallpaper roll can be used to roll over the latex paint surface to destroy the sealability of the latex paint surface layer, and then paint Paint the wall base film, so that it can better deal with the old wall of latex paint.