How To Use Wallpaper Adhesive Powder

The specific use steps of wallpaper glue powder are as follows:

(1) Prepare a clean bucket and mixing tools, prepare a proper amount of clean water in the bucket, usually about 4-5kg of water, and then slowly pour the wallpaper glue powder into the bucket, taking care not to move too fast or too quickly, Be careful to avoid the swirling nest in the center of the bucket, otherwise the wallpaper glue powder will form agglomerates and dissolve incompletely.

(2) After pouring the rubber powder, do not stir slowly and evenly. When the rubber powder and water are fully combined and turn from flake to pasty (this process roughly needs to continue stirring for 2-3 minutes), you can stop the stirring and let it stand for 10-20 minutes. After the time has passed, stir again for 2-3 minutes and you can use it directly. The glue-free powder can be used directly without these steps.

(3) If you want to add white glue or other professional glue, you should pour the matching glue 5-10 minutes after the wallpaper glue powder is poured into the bucket and continue to stir. If you want to change the wallpaper, just wet the wallpaper with a damp cloth to dissolve the glue powder, and then replace the wallpaper.